MEIJI AIR COMPRESSOR
Home Japanese
COMPANY PROFILE CONTACT US
HOME  >  SPRAY GUNS  >  GENERAL-PURPOSE TYPE  > F100 Series


 F100 Series
F100-P F100-G F100-S
F100-P F100-G
with 4GD paint cup
F100-S
with 7SB paint cup


@Two distinct spray patterns accommodate a wide variety of applications
  All nozzle bores feature both a triangle pattern for
  multi-purpose paints and a tulip pattern ideal for
  automotive (urethane) paints and plastic paints.
  There's no need to loosen the cap nut when switching
  between vertical and horizontal spraying.
AExcellent atomization performance even at low pressures
  A newly designed pneumatic circuit ensures excellent atomization within a wide
  spraying pressure range of 0.15 to 0.24MPa (tulip pattern).
BHigh durability and easy maintenance
  The use of a special soft needle packing made of Teflon substantially increases durability.
  The seal components are also made of Teflon for easy maintenance.
CConvenient indicator-marked adjusters
  Both the paint adjuster and pattern adjuster have indicators for easy control of
  the settings and painting conditions.
The paint adjusting
screw can be adjusted
from 0 (closed) to 3
(full-open) in a single
turn.
DExtremely lightweight and perfectly balanced
  These are the lightest spray guns in their class. A special buff-finish enhances both
  the appearance and feel , and the body is designed to fit comfortably in the hand.

 
▽F100 Series
Model No. F100-P08 F100-P10 F100-P13 F100-P15
Paint feed system Pressure
Nozzle Bore mm 0.8 1.0 1.3 1.5
Spraying Pressure MPa 0.34
Spraying distance mm 200
Air con-sumption L/min 270 290
Paint spraying volume mL/min 200 350 500 620
Maximum effective
pattern width
mm 255 250 260 280
Pattern Shape Tulip
Required compressor output kW 1.5 or more
Weight g 410
Standard paint cup Paint pressure feed tanks, diaphragm paint pumps
Measurement m3 0.06/25PC

Model No. F100-S10
<F100-S10T>
F100-S13
<F100-S13T>
F100-S15
<F100-S15T>
F100-S18
<F100-S18T>
Paint feed system Suction
Nozzle Bore mm 1.0 1.3 1.5 1.8
Spraying Pressure MPa 0.29
Spraying sidtance mm 200
Air con-sumption L/min 100
<195>
135
<230>
155
<250>
170
<285>
Paint spraying volume mL/min 110
<115>
160
<165>
190
<195>
210
<215>
Maximum effective
pattern width
mm 130
<170>
165
<200>
185
<230>
195
<250>
Pattern Shape Triangle
<Tulip>
Required compressor output kW 0.4<1.5>
or more
0.75<1.5>
or more
Weight g 410
Standard paint cup 7SB,10SB-2,7SLB,10SLB-2
Measurement m3 0.06/25PC

Model No. F100-G10
<F100-G10T>
F100-G13
<F100-G13T>
F100-G15
<F100-G15T>
F100-G18
<F100-G18T>
Paint feed system Gravity
Nozzle Bore mm 1.0 1.3 1.5 1.8
Spraying Pressure MPa 0.29
Spraying sidtance mm 200
Air con-sumption L/min 100
<195>
135
<230>
155
<250>
170
<285>
Paint spraying volume mL/min 125
<130>
200
<205>
240
<245>
250
<255>
Maximum effective
pattern width
mm 140
<180>
175
<210>
210
<240>
240
<260>
Pattern Shape Triangle
<Tulip>
Required compressor output kW 0.4<1.5>
or more
0.75<1.5>
or more
Weight g 410
Standard paint cup 2GA,4GD,4G-TA,3G-U
Measurement m3 0.06/25PC


Model No. F100-G08R F100-G25R
Paint feed system Gravity
Nozzle Bore mm 0.8 2.5
Spraying Pressure MPa 0.29
Spraying sidtance mm 200
Air con-sumption L/min 60 240
Paint spraying volume mL/min 65 245
Maximum effective
pattern width
mm 50 60
Pattern Shape Round
Required compressor output kW 0.2 〜 0.4 1.5
Weight g 410
Standard paint cup 2GA,4GD,4G-TA,3G-U
Measurement m3 0.06/25PC


  • Paint viscosity should be 22 seconds for lacquer enamel using a Meiji model V-1 viscosity
      cup.
  • Feed pressure should be 0.08MPa for P types.
  • The paint spraying volume and maximum effective pattern width indicated for T types
      were determined using urethane-based automotive repair paint with a viscosity of 12
      seconds and a Meiji model V-1 viscosity cup.


  •  

    COMPANY PROFILE
    CONTACT US

    AIR COMPRESSOR
    SPRAY GUN
    PAINT SYSTEM