MEIJI AIR COMPRESSOR
Home Japanese
COMPANY PROFILE CONTACT US
HOME@ >@ SPRAY GUNS@ >@ GENERAL-PURPOSE TYPE


@F110 Series
*Paint cup should be ordered Separately.
F110-P F110-S F110-G F110-GR
F110-P F110-S
with 7SB paint cup
F110-G
with 4GD paint cup
F110-GR
with 4GD paint cup


@F-ZERO-P Series @F210 Series
F-ZERO-P F210-P F210-S
F-ZERO-P F210-P F210-S
with 10SC paint cup


State-of-the-art Hand Spray Gun based on customer satisfaction
New atomizing system
Improving the spray
finishing by optimum air flow
@
High transfer efficiency Heavy duty Excellent handling

Realizing high quality paint film by optimum spraying paint volume.
Stable air flow vastly realizes the prevention of air pressure lost.
Reduction of paint consumption, and small air consumption in saving energy.
Optimum air flow brings the reduction of paint adhesion to air cap set.
Easy handling with optimum weight balance and light weight.
Reduction of trigger load, and improvement of usability with lower
@@resistance packing.
Waterborne compatibility.
Improvement of parts durability.
Addition of Semi-tulip pattern.
Each nozzle bore size has its own air cap set.
Air cap sets for suction, gravity, and pressure type are interchangeable
@@in the same fluid nozzle bore size

Special air cap designed specitifically for touch-up work
@@(F110-S13ST,F110-S15ST,F110-G13ST,F110-G15ST)

@@Designed specifically for touch-up work to provide the ideal spray for painting small to
@@medium-sized areas.
Special air cap 10PMAS is ideal for spraying pressure at 0.4MPa
@@in the line painting.
@@Stainless steel passage for waterborne compatibility.
@@(F110-P0810PMAS, F110-P10MAS)

@@Designated specially for line painting work to provide beautiful finishing in higher
@@atomization and wider pattern width.
F-ZERO-P
@Special air cap Type P comes from automotive refinishing gun F-ZERO
@in Finer atomization system.
@Realizing ideal atomization and wider pattern in smaller air consumption.

Air cap selection guide for F110 series
Air Cap 08P 10P 13P 15P 10 13 15 20 10T 13T 15T 20T 13ST 15ST 08R 25R
Nozzle
bore
mm
0.8 - -
1.0 - - -
1.3 ~ ~ - ~ - ~ - - ~
1.5 ~ ~ - ~ - ~ - - ~
2.0 ~ ~ ~ - ~ - ~
2.5 ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ -
  • Suction and gravity type are interchangeable for pressure type and vice versa.
  • Spraying paint volume and air consumption are adjusted by changing air cap set and fluid nozzle.
  • Mark Z stands for interchangeable.

  • @@@Air cap selection guide for F210 series
    Air cap 12P 15P 20P 25P 30P 15 20 25 30 15T 20T 25T
    Nozzle
    bore
    mm
    1.2 -
    1.5 - - -
    2.0 - ~ - -
    2.5 ~ ~ - ~ - ~ -
    3.0 ~ ~ ~ - ~ ~ - ~
  • Suction type in the same nozzle size are interchangeable for pressure type and vice versa.
  • Spraying paint volume and air consumption are adjusted by changing air cap set and fluid nozzle.
  • Mark Z stands for interchangeable.

  •  
    €F110 Series
    Model No. F110-P08P F110-P10P F110-P13P F110-P15P F110-P0810PMAS F110-P10OMAS
    Paint feed system Pressure
    Nozzle Bore mm 0.8 1.0 1.3 1.5 0.8 1.0
    Standard air cap 08P 10P 13P 15P 10PMAS
    Spraying Pressure MPa 0.25 0.40
    Spraying distance mm 200 300
    Air con-sumption L/min 220 230 280 290 340
    Paint spraying volume mL/min 180 245 310 330 175 230
    Maximum effective
    pattern width
    mm 230 240 270 275 245 260
    Pattern Shape Tulip
    Required compressor output kW 1.5 or more
    Weight g 293 301
    Standard paint cup Paint pressure feed tanks, diaphragm paint pumps
    Measurement m3 0.06/25PC

    Model No. F110-S10
    <F110-S10T>
    F110-S13
    <F110-S13T>
    (F110-S13ST)
    F110-S15
    <F110-S15T>
    (F110-S15ST)
    F110-S20
    <F110-S20T>
    Paint feed system Suction
    Nozzle Bore mm 1.0 1.3 1.5 2.0
    Standard air cap 10
    <10T>
    13
    <13T>
    (13ST)
    15
    <15T>
    (15ST)
    20
    <20T>
    Spraying Pressure MPa 0.25
    <0.20>
    (0.25)
    Spraying sidtance mm 200
    Air con-sumption L/min 110
    <170>
    140
    <200>
    (215)
    160
    <215>
    (225)
    175
    <225>
    Paint spraying volume mL/min 90
    <75>
    130
    <125>
    (150)
    160
    <150>
    (160)
    210
    <180>
    Maximum effective
    pattern width
    mm 130
    <160>
    160
    <180>
    (160)
    170
    <165>
    (170)
    185
    <210>
    Pattern Shape Triangle
    <Tulip>
    (Semi-Tulip)
    Required compressor output kW 0.4<1.5>
    or more
    0.75<1.5>(1.5)
    or more
    Weight g 293
    Standard paint cup 7SB,10SB-2,7SLB,10SLB-2
    Measurement m3 0.06/25PC

    Model No. F110-G10
    <F110-G10T>
    F110-G13
    <F110-G13T>
    (F110-G13ST)
    F110-G15
    <F110-G15T>
    (F110-G15ST)
    F110-G20
    <F110-G20T>
    Paint feed system Gravity
    Nozzle Bore mm 1.0 1.3 1.5 2.0
    Standard air cap 10
    <10T>
    13
    <13T>
    (13ST)
    15
    <15T>
    (15ST)
    20
    <20T>
    Spraying Pressure MPa 0.25
    <0.20>
    (0.25)
    Spraying sidtance mm 200
    Air con-sumption L/min 110
    <170>
    140
    <200>
    (215)
    160
    <215>
    (225)
    175
    <225>
    Paint spraying volume mL/min 95
    <90>
    150
    <160>
    (180)
    180
    <180>
    (205)
    260
    <235>
    Maximum effective
    pattern width
    mm 140
    <180>
    170
    <210>
    (180)
    180
    <215>
    (190)
    195
    <240>
    Pattern Shape Triangle
    <Tulip>
    (Semi-Tulip)
    Required compressor output kW 0.4<1.5>
    or more
    0.75<1.5>(1.5)
    or more
    Weight g 293
    Standard paint cup 1G-2U,2GD,4GD,4GF-U,4GB-U,4GPA-U,4G-TA
    Measurement m3 0.06/25PC


    Model No. F110-G08R F110-G25R
    Paint feed system Gravity
    Nozzle Bore mm 0.8 2.5
    Standard air cap 08R 25R
    Spraying Pressure MPa 0.25
    Spraying sidtance mm 200
    Air con-sumption L/min 75 155
    Paint spraying volume mL/min 55 320
    Maximum effective
    pattern width
    mm 35 50
    Pattern Shape Round
    Required compressor output kW 0.4 or more 1.5 or more
    Weight g 293
    Standard paint cup 1G-U,2GD,4GD,4GF-U,4GB-U,4GPA-U,4G-TA
    Measurement m3 0.06/25PC


    €F-ZERO Series
    Model No. FZERO-P08 FZERO-P10 FZERO-P13
    Paint feed system Pressure
    Nozzle Bore mm 0.8 1.0 1.3
    Standard air cap Type P
    Spraying Pressure MPa 0.2
    Spraying sidtance mm 200
    Air con-sumption L/min 240 230
    Paint spraying volume mL/min 160 250 340
    Maximum effective
    pattern width
    mm 220 280 320
    Pattern Shape Tulip
    Required compressor output kW 1.5 or more
    Weight g 295
    Standard paint cup Paint pressure feed tanks diaphragm paint pumps


    €F210 Series
    Model No. F210-P12P F210-P15P F210-P20P F210-P25P F210B-P30P
    Paint feed system Pressure
    Nozzle Bore mm 1.2 1.5 2.0 2.5 3.0
    Standard air cap 12P 15P 20P 25P 30P
    Spraying Pressure MPa 0.25
    Spraying sidtance mm 250
    Air con-sumption L/min 335 345 375 410 420
    Paint spraying volume mL/min 530 880 1280 1710 1940
    Maximum effective
    pattern width
    mm 350 370 400 420 440
    Pattern Shape Tulip
    Required compressor output kW 2.2 or more 3.7 or more
    Weight g 391
    Standard paint cup Paint pressure feed tanks, diaphragm paint pumps
    Measurement m3 0.06/25PC

    Model No. F210-S15
    <F210-S15T>
    F210-S20
    <F210-S20T>
    F210-S25
    <F210-S25T>
    F210B-S30
    Paint feed system Suction
    Nozzle Bore mm 1.5 2.0 2.5 3.0
    Standard air cap 15
    <15T>
    20
    <20T>
    25
    <25T>
    30
    Spraying Pressure MPa 0.25
    Spraying sidtance mm 250
    Air con-sumption L/min 170
    <250>
    220
    <280>
    275
    <335>
    320
    Paint spraying volume mL/min 205
    <220>
    285
    <265>
    350
    <325>
    360
    Maximum effective
    pattern width
    mm 220
    <300>
    280
    <310>
    300
    <320>
    300
    Pattern Shape Triangle
    <Tulip>
    Required compressor output kW 1.5<2.2>
    or more
    2.2<2.2>
    or more
    2.2<3.7>
    or more
    3.7
    or more
    Weight g 391
    Standard paint cup 10SC , 10SLB
    Measurement m3 0.06/25PC

  • Paint viscosity should be 20 seconds for lacquer enamel using a Meiji model V-1 viscosity
    @@cup.
  • Feed pressure should be 0.08MPa for P types.
  • The paint spraying volume and maximum effective pattern width indicated for T types
    @@should be determined using urethane-based automotive repair paint with a viscosity of
    @@12 seconds and a Meiji model V-1 viscosity cup.


  • @

    COMPANY PROFILE
    CONTACT US

    AIR COMPRESSOR
    SPRAY GUN
    PAINT SYSTEM