F110 Series｜SPRAY GUN｜MEIJI AIR COMPRESSOR MFG.CO.,LTD

F110 Series

Hand Spray Guns：General Purpose Type

	New atomizing system Improving the spray finishing by optimum air flow

●Realizing high quality paint film by optimum spraying paint volume.
●Stable air flow vastly realizes the prevention of air pressure lost.
●Reduction of paint consumption, and small air consumption in saving energy.
●Optimum air flow brings the reduction of paint adhesion to air cap set.
●Easy handling with optimum weight balance and light weight.
●Reduction of trigger load, and improvement of usability with lower resistance packing.
●Waterborne compatibility.
●Improvement of parts durability.
●Addition of Semi-tulip pattern.
●Each nozzle bore size has its own air cap set.
●Air cap sets for suction, gravity, and pressure type are interchangeable in the same fluid nozzle bore size

Designed specifically for touch-up work to provide the ideal spray for painting small to medium-sized areas.

Designated specially for line painting work to provide beautiful finishing in higher atomization and wider pattern width.

Air Cap		08P	10P	13P	15P	10	13	15	20	10T	13T	15T	20T	13ST	15ST	08R	25R
▽Air cap selection guide for F110 series
Nozzle bore mm	0.8	-	●	●	●	●	●	●	●	●	●	●	●	●	●	-	●
	1.0	●	-	●	●	-	●	●	●	-	●	●	●	●	●	●	●
	1.3	×	×	-	●	×	-	●	●	×	-	●	●	-	●	×	●
	1.5	×	×	●	-	×	●	-	●	×	●	-	●	●	-	×	●
	2.0	×	×	●	●	×	●	●	-	×	●	●	-	●	●	×	●
	2.5	×	×	×	×	×	×	×	×	×	×	×	×	×	×	×	-
Suction and gravity type are interchangeable for pressure type and vice versa. Spraying paint volume and air consumption are adjusted by changing air cap set and fluid nozzle. Mark 〇 stands for interchangeable.

▼F110 Series
Model No.		F110-P08P	F110-P10P	F110-P13P	F110-P15P	F110-P0810PMAS	F110-P100MAS
Paint feed system		Pressure
Nozzle Bore	mm (in)	0.8 (0.031)	1.0 (0.039)	1.3 (0.051)	1.5 (0.059)	0.8 (0.031)	1.0 (0.039)
Standard air cap		08P	10P	13P	15P	10PMAS
Spraying Pressure	MPa (PSI)	0.25 (36)				0.40 (58)
Spraying distance	mm (in)	200 (7.874)				300 (11.811)
Air con-sumption	L/min (cfm)	220 (7.8)	230 (8.1)	280 (9.9)	290 (10.2)	340 (12.0)
Paint spraying volume	mL/min	180	245	310	330	175	230
Maximum effective pattern width	mm (in)	230 (9.055)	240 (9.449)	270 (10.630)	275 (10.827)	245 (9.646)	260 (10.236)
Pattern Shape		Tulip
Required compressor output	kW	1.5 or more
Weight	g (lbs) [oz]	293 (0.65) [10.3]				301 (0.66) [10.6]
Standard paint cup		Paint pressure feed tanks, diaphragm paint pumps

Model No.		F110-S10 　 <F110-S10T>	F110-S13 　 <F110-S13T> 　 {F110-S13ST}	F110-S15 　 <F110-S15T> 　 {F110-S15ST}	F110-S20 　 <F110-S20T>
Paint feed system		Suction
Nozzle Bore	mm (in)	1.0 (0.039)	1.3 (0.051)	1.5 (0.059)	2.0 (0.079)
Standard air cap		10 <10T>	13 <13T> {13ST}	15 <15T> {15ST}	20 <20T>
Spraying Pressure	MPa (PSI)	0.25<0.20>{0.25} (36<29>{36})
Spraying sidtance	mm (in)	200 (7.874)
Air con-sumption	L/min (cfm)	110<170> (3.9<6.0>)	140<200>{215} (4.9<7.1>{7.6})	160<215>{225} (5.6<7.6>{7.9})	175<225> (6.2<7.9>)
Paint spraying volume	mL/min	90 <75>	130 <125> (150)	160 <150> (160)	210 <180>
Maximum effective pattern width	mm (in)	130<160> (5.118<6.230>)	160<180>{160} (6.230<7.087>{6.230})	170<185>{170} (6.693<7.283>{6.693})	185<210> (7.283<8.268>)
Pattern Shape		Triangle <Tulip> (Semi-Tulip)
Required compressor output	kW	0.4<1.5> or more	0.75<1.5>(1.5) or more
Weight	g (lbs) [oz]	293 (0.65) [10.3]
Standard paint cup		7SB,10SB-2,7SLB,10SLB-2

Model No.		F110-G10 　 <F110-G10T>	F110-G13 　 <F110-G13T> 　 {F110-G13ST}	F110-G15 　 <F110-G15T> 　 {F110-G15ST}	F110-G20 　 <F110-G20T>
Paint feed system		Gravity
Nozzle Bore	mm (in)	1.0 (0.039)	1.3 (0.051)	1.5 (0.059)	2.0 (0.079)
Standard air cap		10 <10T>	13 <13T> (13ST)	15 <15T> (15ST)	20 <20T>
Spraying Pressure	MPa (PSI)	0.25<0.20>{0.25} (36<29>{36})
Spraying sidtance	mm (in)	200 (7.874)
Air con-sumption	L/min (cfm)	110<170> (3.9<6.0>)	140<200>{215} (4.9<7.1>{7.6})	160<215>{225} (5.6<7.6>{7.9})	175<225> (6.2<7.9>)
Paint spraying volume	mL/min	95 <90>	150 <160> (180)	180 <180> (205)	260 <235>
Maximum effective pattern width	mm (in)	140<180> (5.512<7.087>)	170<210>{180} (6.693<8.268>{7.087})	180<215>{190} (7.087<8.465>{7.480})	195<240> (7.677<9.449>)
Pattern Shape		Triangle <Tulip> (Semi-Tulip)
Required compressor output	kW	0.4<1.5> or more	0.75<1.5>(1.5) or more
Weight	g (lbs) [oz]	293 (0.65) [10.3]
Standard paint cup		1G-2U,2GD,4GD,4GF-U,4GB-U,4GPA-U,4G-TA

Model No.		F110-G08R	F110-G25R
Paint feed system		Gravity
Nozzle Bore	mm (in)	0.8 (0.031)	2.5 (0.098)
Standard air cap		08R	25R
Spraying Pressure	MPa (PSI)	0.25 (36)
Spraying sidtance	mm (in)	200 (7.874)
Air con-sumption	L/min (cfm)	75 (2.6)	155 (5.5)
Paint spraying volume	mL/min	55	320
Maximum effective pattern width	mm (in)	35 (1.378)	50 (1.969)
Pattern Shape		Round
Required compressor output	kW	0.4 or more	1.5 or more
Weight	g (lbs) [oz]	293 (0.65) [10.3]
Standard paint cup		1G-2U,2GD,4GD,4GF-U,4GB-U,4GPA-U,4G-TA
●Paint viscosity should be 20 seconds for lacuer enamel using a meiji model V-1 cup. ●Feed pressure should be 0.08MPa(12PSI) for P types. ●The values marked with * should be obtained using automotive refinishing paint with a paint viscosityof 12 seconds and a Meiji model V-1 viscosity cup. ●Air and paint inlet : G1/4 ●Left handed type is available in F110-G type. For more information, please contact your local distributor or us.

by phone

FAX.+81-6-6309-0157

by e-mail