SPRAY GUN

Pipe inside extension automatic spray gun

Automatic Spray Guns:Extension Type

PRODUCT

  • A110-PX11L

    A110-PX11L

  • FA110-PX11L

    FA110-PX11L

Features

INSIDE PAINT TYPE

Model (F)A110-PX17LA can spray both full cone and hollow cone in adjusting the position of pipe place, 

and it is suitable for spraying inside of the pipe in less than φ300mm.

 

Spraying Movie

front back

 

 

Remarks

●Head angle cannot be changed when the spray gun is in use, and shall be changed after cleaning the paint circuit
 with no fluids inside. Due to its design and structure, please avoid changing the angle frequently.
●When the spray gun is in use, please do not loosen the Air cap nut. When changing direction of Air cap,
 Air cap itself shall be turned without loosening the Air cap nut.
●Fluid viscosity shallbe less than 30sec by using Meiji V-1 model viscosity cup. Fluids with high viscosity may result in
 less ejection amount.

Specifications

Model No. FA110-PX11L
<A110-PX11L>
FA110-PX17LA
<A110-PX17LA>
-Full coneHollow cone cone
Type With a built-in sprying air valve <Multi-purpose>
Pipe inside extension automatic spraying gun
Paint feed system Pressure
Nozzle bore

mm

(in)

1.5

(0.059)

1.3

(0.051)

Standard air cap 15P -
Spraying pressure

MPa

(PSI)

0.25

(36)

0.3

(44)

Spraying distance

mm

(in)

200

(7.874)

150

(5.906)

30

(1.181)

Air con-sumption

L/min

(cfm)

70

(2.5)

180

(6.4)

Paint spraying volume mL/min 120 130 300(130)
Maximum effective pattern width

mm

(in)

60

(2.362)

100

(3.937)

300 **250

(11.811 **9.843)

Head angle and inner dia.

info which head can be inserted

mm

(in)

0°:13

(0°:0.512)

0°:20

(0°:0.512)

(straight only)

Pipe length

mm

(in)

500 1000 1500 1800*

(19.685 39.370 59.055 70.866)

Weight

g

(lbs)

[oz]

760<440>

(1.68<0.97>)

[26.8<15.5>]

946<633>

(2.08<1.40>)

[33.4<22.3>]

●Pipe length with mark * is the maximum length. Use of the longer pipe will result in reducing paint spraying volume.
●Paint viscosity should be 20 seconds for lacquer enamel using a Meiji model V-1 viscosity cup.
 Feed pressure should be 0.08MPa(12PSI).
●For model PX17LA; Paint viscosity should be 12 seconds, 20 seconds in parenthesis,
   and the feed pressure should be 0.08MPa(12PSI), 0.03MPa(4PSI) in parenthesis.
●Spcifications is for spray guns of pipe length 500mm.

 

New FINER-FORCE CATALOG IMITATION

IMITATION

CATALOG

IMITATION

CONTACT US

by phone

TEL.+81-6-6309-1227

FAX.+81-6-6309-0157