SPRAY GUN

Multi-Purpose gun (HS-2A / HS-2YA)

Other Guns:Architectural Spray Guns

PRODUCT

  • HS2A-G(C)

    HS2A-G(C)

  • HS2YA-G(C)

    HS2YA-G(C)

Features

Wide selection of models

In addition to models specially designed for use with tile, resin, mortar, stucco, micro-fine stucco, etc.,

our extensive product line-up also includes multi-purpose spray guns and other models for every type of application.

 

Lightweight, excellent balance

Optimum efficiency design makes these spray guns extremely light-weight and

the excellent handling balance minimizes operator fatigue during extended use.

 

One-touch operation (Models AGA, HS2A and HS2YA)

A special patented mechanism in which a hollow needle valve is automatically moved

back and forth by air pressure makes "one-touch" operation possible for improved work efficiency.

 

Thoughtfully designed to make work easier (Models SGS, AGA, KGA and LGA)

The large cup capacity and good paint flow make working with these spray gun easier.

An air regulating valve eliminates uneven spraying to ensure consistently reliable 

painting , and a valve button locking system enables continuous operation.

 

How to Select a Spray Gun for Architectural Painting

Determine the spray gun and paint nozzle bore to be used according to the name of the

paint, the paint viscosity, the size of the aggregate, and the pattern.

Also refer to the standard specifications listed in the paint catalog with regard to the

spray gun name, nozzle bore, spraying pressure, etc.

 

Types of Aggregate

Quartz sand, white marble, sand, clay-based crushed grains

50 mesh = 279μm

Reference sizes : Table salt = 100μm,

            Strand of human hair = 70μm

 

Model No. F210Z-P25ZHS2-G / HS2Y-GF210Z-P
Zloacoat    
micro-fine stucco    
Adhesive    
Size of aggregates - 50 mesh and smaller -
●Adhesive must be a solvent-based type with a viscosity of 500 MPa・s or less
●Mark * is for water-based Zolacoat.

Specification information

Model No. HS2A-G30HS2A-G40HS2YA-G30HS2YA-G40
Type Multi-Purpose gun
Paint feed system Gravity
Nozzle bore mm 3.0 4.0 3.0 4.0
Air nozzle bore mm 1.5
Spraying pressure MPa 0.29
Air con-sumption L/min 225
Spray pattern Round Flat
Required compressor output kW 0.75 or more
Paint cup Capacity L 1.5
Weight g 1173 Gun Only:538 1266 Gun Only:566
  • Air inlet : G1/4
  • Boldface of fluid nozzle and air nozzle is a first setting , and the other nozzle sizes are accessories.

CATALOG IMITATION

CATALOG

IMITATION

CONTACT

Us by phone

TEL.+81-6-6309-1227

FAX.+81-6-6309-0157